Fine Etch Crystals Sodium Persulphate

£16.00£28.00

Fine Etch Crystals are a newer,  cleaner etchant solution, which is in some ways superior to standard Ferric chloride commonly used for etching copper printed circuit boards.  It causes less underetching than Ferric Chloride, thus can produce cleaner structures and finer detail.  Etching time is slightly longer than with Ferric Chloride, however the solution remains clear during etching turning a transparent blue so the Etching progress can still be easily monitored  and the solution does not crystallise.

This etchant eliminates the staining and mess caused by traditional etchants.  The mixed solution remains odourless and any splashes or drips can be wiped away with a damp cloth, preventing staining.

Due to the Hazardous nature of this product, if ordering for export overseas please contact us and do not order online as extra freight charges may be applicable.

Available Options:

A very effective alternative to Ferric Chloride, this etchant eliminates the staining and mess caused by traditional etchants.  The mixed solution remains odourless and any splashes or drips can be wiped away with a damp cloth, preventing staining.  A 6-8 minute etching times at 50°C should be expected with a fresh solution, Etching Speed: 0.7 to 1.4µm / minute.  The etching solution will have approximately a 4-6 week life expected in tank (This can be increased by adding a little more powder to exhausted solution)

Supplied as 0.5kg or 1kg in powder form in a container.

Based on Sodium Persulphate

0.5Kg Makes approximately 2.5 Litres working Solution

1Kg Makes approximately 5 Litres working solution

Due to the Hazardous nature of this product, if ordering for export overseas please contact us and do not order online as extra freight charges may be applicable.

Weight 2 kg
Weight

0.5Kg, 1Kg