The RF200 is a very popular desktop conveyorized soldering Reflow Oven. It fits perfectly in small to medium production lines. This conveyor reflow oven uses horizontal convection heating technology to accomplish reflow at much lower temperatures than normally achievable. Using constant, even heating, a great variety of board sizes will reach reflow temperature with the same heat profile. By eliminating set-up time your production line can work to its fullest capacity. With reduced energy consumption and carefully controlled air-flow and exhaust systems, your plant will only benefit from its introduction.
Highlights:
- Suitable for single sided as well as double sided PCB’s.
- Can also be used as a conveyor drying oven for many product types
- Tunnel conveyor oven offering easier/better performing profiling over drawer style reflow oven
- Easy processing through an intuitive user interface allowing the perfect reflow profile to be achieved
- Easy lift clam shell hood
- Adjustable conveyor Speed
- Single Phase or three phase operation
- Forced air convection provides uniform heating and prevents shadowing.
- 5 zones with maximum temperatures up to 400°C (752°F) . Can be used for both lead free and leaded soldering
- 100mm Diameter spigot for connection of supplied hose to take away fumes from the location of the oven
- Two detachable thermocouples for measuring substrate temperatures.
- Control by RS232 connection is available
- Exhaust pipe system included for oven output
Heating Zone: Upper 3 Heating Zones + Bottom 2 Heating Zones
Heating Method: M Type Stainless Steel Finned Heating Pipe
Cooling Zone: 2 Natural Air Cooling
Heat Tunnel length: 960mm
Coveyor Mesh Width: 300mm
PCB Width Allowance: Max. 280mm
PCB Height Allowance: ≤20mm
Mesh Height: 300±20mm
Conveyor Speed: Adjustable on Front Panel 0-1350mm/min
Conveyor Direction: Left→Right
Preheat Time: 15-20mins
Soldering Time: 3.5-5.5mins
Temperature Range: 0°C-400°C (0°C-752°F)
Temperature Control: PID Digital Temperature Control System
Voltage: AC 380VAC 50Hz (Three Phase), 220VAC 50Hz (Single Phase)
Starting Power: 7KW
Working Power: 2.5KW
Net Weight: 150kgs
Gross Weight: 210kgs
Machine Size: L1700×W710×H660mm
Package Dimension: 1840 x 840 x 800mm